Enterprise SwitchingCatalyst 9200 Series
Secure, resilient branch and campus access switching, built on the Catalyst 9000 family.
Cisco Catalyst 9200 Series switches bring enterprise-grade resilience and security to the access layer at branch scale — full PoE+, power and fan redundancy, up to 160 Gbps stacking, modular uplinks, and Layer 3 features. As part of the Catalyst 9000 family they run IOS XE with built-in security and telemetry. Faltrox deploys, hardens, and manages them as part of a secure network foundation.
Overview
What Catalyst 9200 Series is
The Catalyst 9200 Series is Cisco’s entry point into the Catalyst 9000 family for branch and simpler campus access, where you still need enterprise resilience and security without the density of the higher tiers. It delivers full PoE+ for phones, cameras, and access points, redundant power and fans, stacking up to 160 Gbps, and Layer 3 routing — with fanless C9200CX models for space-constrained deployments.
Being part of the Catalyst 9000 family means it shares the same IOS XE software, security model, and management as its bigger siblings — TrustSec segmentation, MACsec encryption, Encrypted Traffic Analytics, and a choice of on-premises, virtual, or Cisco Meraki cloud management. That consistency is what lets a branch access switch enforce the same policy as the core. Faltrox deploys it, applies segmentation and hardening, and folds its telemetry into the monitoring it runs for you.
Coverage
What it protects
The platforms, threats, and surfaces this product is built to defend.
Branch & Campus Access
Enterprise-grade access-layer switching for branches and simpler campus deployments.
PoE+ Devices
Full PoE+ powers IP phones, wireless access points, and IP cameras from the switch.
IoT & OT Endpoints
Connects and segments the growing population of IoT and OT devices at the edge.
Segmentation
Cisco TrustSec group-based policy and Layer 3 features contain lateral movement.
Resilience
Field-replaceable units, redundant power and fans, and stacking keep the access layer up.
MACsec Encryption
Line-rate MACsec encrypts traffic on the wire between switch and endpoint.
How it works
The mechanism
How the product moves from signal to protected state, step by step.
- 01
Deploy
Switches are provisioned into the access layer with stacking for capacity and redundancy, managed on-premises, virtually, or via the Meraki cloud dashboard.
- 02
Segment
TrustSec group-based policy and Layer 3 features enforce who and what can talk to whom, containing lateral movement from a compromised endpoint.
- 03
Encrypt
MACsec encrypts traffic at line rate on the wire, protecting data between the endpoint and the switch.
- 04
Observe
Built-in telemetry and Encrypted Traffic Analytics feed visibility into the network monitoring Faltrox operates.
- 05
Operate
Faltrox hardens the configuration, maintains software, and folds the switch into ongoing management and monitoring.
Capabilities
Key capabilities
PoE+ Access
Full Power over Ethernet Plus for phones, access points, and cameras across the access layer.
160 Gbps Stacking
Stack multiple switches for combined capacity and resilience with a single management point.
Layer 3 Feature Support
Routed access and Layer 3 features bring flexibility to the access layer, not just Layer 2.
Cisco TrustSec
Group-based segmentation enforces policy by identity rather than IP address or VLAN.
MACsec Encryption
Line-rate encryption on the wire protects traffic between endpoints and the switch.
Power & Fan Redundancy
Field-replaceable redundant power supplies and fans keep the access layer resilient.
Flexible Management
Manage on-premises, virtually, or from the Cisco Meraki cloud dashboard.
IOS XE Consistency
The same software and security model as the rest of the Catalyst 9000 family for consistent policy.
Works with
Part of the platform
Cisco products this pairs with, and the Faltrox services that operate it.
Delivery
You buy the outcome, not the console
Managed by Faltrox
Faltrox licenses, deploys, and tunes Cisco Catalyst 9200 Series for your environment, then runs it as part of a managed service, so you get the protection without staffing another security console.
FAQ
Common questions
01Where does the 9200 fit versus the 9300?
The 9200 is the entry tier of the Catalyst 9000 family — branch and simpler campus access with strong resilience and security but lower density and stacking bandwidth than the 9300. The 9300 is the lead stackable access platform with much higher stacking (up to 1 TB), 90W UPOE+, and 100G IPsec. Faltrox scopes which tier fits each site.
02Does it still enforce the same security policy as the core?
Yes — that is the point of it being in the Catalyst 9000 family. It shares IOS XE, TrustSec segmentation, MACsec, and Encrypted Traffic Analytics with the higher tiers, so a branch access switch enforces the same identity-based policy as the campus core.
03Can it be cloud-managed?
Yes. You can manage it on-premises, virtually, or migrate it to the Cisco Meraki dashboard for centralised cloud management and monitoring — Faltrox recommends the model based on your operations.
04What does Faltrox actually do with the switches?
We are a security company that deploys and operates Cisco infrastructure securely — provisioning, applying segmentation and hardening, maintaining software, and feeding the switch’s telemetry into the network monitoring and SOC services we run for you.
05How does it help contain an attack?
TrustSec group-based segmentation and Layer 3 features at the access layer limit what a compromised endpoint can reach, and MACsec plus Encrypted Traffic Analytics protect and surface traffic — turning the access switch into an enforcement and visibility point, not just a connectivity device.
Start an engagement
Secure what’s next.
Speak with the engineering team to define scope, walk through the methodology, and decide whether Faltrox is the right team to test and run your environment.
Contact us